Loop Detectors

Loop Detectors

Loop Detectors are used in conjunction with vehicle detection loops to detect vehicular traffic traveling or stopping overhead in a roadway. These are commonly used to trigger traffic lights and you have undoubtedly traveled over thousands of them without even realizing it. In the automated gate industry we use these devices to trigger gates to open for access and egress and also to serve as safety devices that protect vehicles in the path of the gate. Loop detectors can be used for a variety of other purposes including counting vehicular traffic, arrival notifications, and turning on driveway lighting. Although it is common to install loops for safety they do not meet UL325 compliance because they only detect vehicular traffic and not pedestrians or animals. Loop detectors are available as direct plug-in for specific gate operator control boards, or use a universal 11-pin octal connector. The octal connector is available as a harness or a mountable socket. View More Loop Detector & Loop Overview. We carry models from Diablo Controls, DoorKing, EMX, FAAC, Reno AE, LiftMaster, Northstar Controls, Linear, Eagle, EDI, Miller Edge, All-O-Matic, Byan, Nice HySecurity, and Ramset. If you need help picking out the correct loop detector for you application please give us a call at (888) 818-4283.

  • Seco-Larm LD-1123-PAQ Loop Detector
    Seco-Larm LD-1123-PAQ Loop Detector
    • Single loop input • 3 Adjustable sensitivity settings • 2 Form "C" relay outputs • 11-Pin connector • Automatic drift compensation for varying environmental conditions • Auto fault detection • Weather-resistant (IP54) • Terminal block (LD-ACC-TB) included
    $49.00
  • EDI LMA-1800-LP Loop Detector, Plug In, Low Power
    EDI LMA-1800-LP Loop Detector, Plug In, Low Power
    EDI LMA-1800-LP Low Power Loop Detector
    $81.95
  • EMX 2663-1 ULT-II Inductive Loop Detector - Plug-In
    EMX 2663-1 ULT-II Inductive Loop Detector - Plug-In
    • Plug-in loop detector • Detachable 7-pin terminal block • 10 sensitivy settings / 4 frequencies • Fail-safe in the event of a loop failure • Fail-secure in the event of a power loss • Easy to install and setup with the ULTRAMETER™ sensitivity display • 2-Year Limited Manufacturer Warranty • MADE IN USA
    $74.99
  • EMX MVP-DTEK Inductive Loop Detector - Universal Voltage
    EMX 2550-1 MVP-D-TEK Inductive Loop Detector - Universal Voltage
    • Universal voltage • Operates in both fail safe and fail secure modes • 10 sensitivity settings • Loop diagnostics • 2 relays • 2-Year Limited Manufacturer Warranty • MADE IN USA
    $96.95
  • EMX LP-DTEK Inductive Loop Detector - Low Power
    EMX 2500-1 LP-D-TEK Inductive Loop Detector - Low Power
    • Low power consumption, ideal for solar power applications • Reduced energy costs • Operates in both fail safe and fail secure modes • Surge protection • Loop diagnostics • 2 relays • 2-Year Limited Manufacturer Warranty • MADE IN USA
    $97.95
  • Diablo DSP-7 Low Voltage Loop Detector
    Diablo Controls DSP-7 Loop Detector - Low Voltage
    • Self-contained small form factor • 10-30 VAC/DC • Easy to remove terminal connector • Single output 1 amp relay • 5yr Manufacturer Warranty
    $82.95
  • LiftMaster Elite AELD Loop Detector - Plug-In
    LiftMaster Elite AELD Loop Detector - Plug-In
    • Elite loop detector • Plugs into the OmniControl™ board • For Pre-2016 SL3000UL, CSW200UL, and HCT operators
    $128.95
  • Liftmaster LOOPDETLM Plug In Loop Detector
    Liftmaster LOOPDETLM Loop Detector - Plug-In
    • Plug-in connector • 12VDC/3mA low power draw • Includes Diagnostic and test feature • Prevents the gate from closing on a vehicle in the path • Power Efficient for maximum cycles on Battery Backup • Works with new Liftmaster UL325 2016 boards only
    $121.95
  • DoorKing 9410-010 Loop Detecter - DKS - Single Channel
    DoorKing 9410-010 Loop Detecter - DKS - Single Channel
    • DKS Single Channel Loop Detector • Loop Detector plugs directly into DKS gate operator control boards • For use with DoorKing gate operators only • 3-5 Day Lead Time
    $156.95
  • DoorKing 9402-050 Loop Detector - Diablo
    DoorKing 9402-050 Loop Detector - Diablo
    • 10-30 VAC/DC • Ultra low power for solar applications • 3-5 Day Lead Time
    $92.95
  • DoorKing 9409-010 Loop Detecter - DKS - Two Channel
    DoorKing 9409-010 Loop Detecter - DKS - Two Channel
    • DKS Two Channel Loop Detector • Loop Detector plugs directly into DKS gate operator control boards • For use with DoorKing gate operators only • 3-5 Day Lead Time
    $295.95
  • EMX ULT-DIN Inductive Loop Detector - Din Rail Mount
    EMX 2600-1 ULT-DIN Inductive Loop Detector - Din Rail Mount
    • Din rail mount • 10 sensitivy settings / 4 frequencies • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature • Fits into small operator housings, saving space • Easy to install and setup with the ULTRAMETER™ sensitivity display • Low current draw — green product • Easy identification of interference problems using the crosstalk and RFI interference display • 2-Year Limited Manufacturer Warranty • MADE IN USA
    $93.95
  • EMX ULT-MVP Inductive Loop Detector - Single Channel
    EMX 2650-1 ULT-MVP-U Inductive Loop Detector - Single Channel
    • Single Channel • 10 sensitivy settings / 4 frequencies • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature • Fits into small operator housings, saving space • Easy to install and setup with the ULTRAMETER™ sensitivity display • Low current draw — green product • Easy identification of interference problems using the crosstalk and RFI interference display • 2-Year Limited Manufacturer Warranty • MADE IN USA
    $114.89
  • EMX ULT-MVP-2 Inductive Loop Detector - Dual Channel
    EMX 2630-1 ULT-MVP-2U Inductive Loop Detector - Two Channels
    • Two Channels • 10 sensitivy settings / 4 frequencies • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature • Fits into small operator housings, saving space • Easy to install and setup with the ULTRAMETER™ sensitivity display • Low current draw — green product • Easy identification of interference problems using the crosstalk and RFI interference display • 2-Year Limited Manufacturer Warranty • MADE IN USA
    $128.98
  • FAAC 26671.5 SP10 Shadow Detector Kit, 115VAC
    FAAC 26671.5 SP10 Shadow Loop Detector Kit - 115VAC
    • SP10 / 115V • 3-5 Day Lead Time
    $218.95
  • DoorKing Reno A&E Loop Detectors
    DoorKing 9402 Loop Detectors - Reno A&E
    Choose 12/24VDC/24VAC or 120VAC • 2 relay outputs • Requires 9402-061 Wire Harness • 3-5 Day Lead Time
    The price depends on the options chosen on the product page

    As low as $0.00

    Configure
  • Miller Edge B Series Loop Detectors
    Miller Edge B Series Loop Detectors
    Available in 24V and 120V • With Harness • 4 loop frequencies • 8 levels of sensitivities
    The price depends on the options chosen on the product page

    As low as $0.00

    Configure
  • EMX ULT-PLG Inductive Loop Detector - Plug-In
    EMX 2670-1 ULT-PLG Inductive Loop Detector - Plug-In
    • Plug-in loop detector • 10 sensitivy settings / 4 frequencies • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature • Easy to install and setup with the ULTRAMETER™ sensitivity display • Low current draw — green product • Compatible with many gate operators • 2-Year Limited Manufacturer Warranty • MADE IN USA
    $76.95
  • FAAC 2681 10-Pin Plug-In Loop Detector
    FAAC 2681 VEK MNSF Loop Detector - Plug-In
    • Power supply 10-30 V AC/DC max 1 W • Relay outputs max 2A 230 VAC • 10 pins molex connector • Automatic adjustment of the operating frequency for best performance • Self setting at power-up • Loop fault signal • Operating ambient temperature -35°F to +158°F (-37°C to +70°C) • 3-5 Day Lead Time
    $144.95
  • FAAC 2680 VEK MNE1-R24-B Loop Detector
    FAAC 2680 VEK MNE1-R24-B Loop Detector
    • Power supply 10-30 V AC/DC max 1 W • Relay outputs max 2A 230 VAC • 11 pins circular connector • Automatic adjustment of the operating frequency for best performance • Self setting at power-up • Loop fault signal • Operating ambient temperature -35°F to +158°F (-37°C to +70°C) • 3-5 Day Lead Time
    $127.95
  • DoorKing 9411-010 Single Channel Loop Detecter w/ Auxiliary Relay
    DoorKing 9411-010 Loop Detecter - DKS - Single Channel w/ Auxiliary Relay
    • DKS Single Channel Loop Detector w/ Auxiliary Relay • Loop Detector plugs directly into DKS gate operator control boards • For use with DoorKing gate operators only • 3-5 Day Lead Time
    $168.95
  • DoorKing 9415-010 Two Channel Low Power Loop Detector
    DoorKing 9415-010 Loop Detecter - DKS - Two Channel / Low Power
    • DKS Two Channel Loop Detector • Loop Detector plugs directly into DKS gate operator control boards • Low Power - Use w/ Solar Operators • For use with DoorKing gate operators only • 3-5 Day Lead Time
    $306.95
  • DoorKing 9416-010 Single Channel Low Power Loop Detector
    DoorKing 9416-010 Loop Detecter - DKS - Single Channel / Low Power
    • DKS Single Channel Loop Detector • Loop Detector plugs directly into DKS gate operator control boards • Low Power - Use w/ Solar Operators • For use with DoorKing gate operators only • 3-5 Day Lead Time
    $177.95
  • Diablo DSP-40 Loop Detector - Plug-In
    Diablo Controls DSP-40 Loop Detector - Plug-In
    • Plug-in detector • 10-30v AC/DC • 10 position molex plug and play connector • Easy access front panel reset switch • Dimensions: H: 2.4" W: 0.8" D: 2.25" • 5yr Manufacturer Warranty
    $75.95
  • Diablo DSP-20-LV Dual Channel Low Voltage Detector
    Diablo Controls DSP-20-LV Loop Detector - Low Voltage / Dual Channel
    • 10-30V AC/DC • Directional logic • Fail-safe or fail-secure operation • 4 sensitivity settings • 5yr Manufacturer Warranty • Requires 11-Pin Harness
    $187.95

Items 1-25 of 55